Smart Dimmer
Eaton Smart dimmer, 7-step LED light level display, Flush, 120V, Wire lead, Push pad, Maintained, White, Fan, LED, INC, CFL, ELV, MLV, FLR, Halogen, Single-pole, Single-phase, Multi-location, Polycarbonate
- Preset feature allows user to return to previous light setting when turning lights ON
- Master/Accessory units for multi-location control
- Amber LED at bottom of LED display indicates ON/OFF load status
- Seven step green LED display indicates selected light level – and reduces brightness when OFF (nightlight feature)
- Pressing and holding push pad for 2 seconds when dimmer is OFF brings light to full brightness without affecting preset levels
- Offers a 10 second delayed-OFF feature by pressing and holding push pad for 2 seconds when dimmer is ON
- Aesthetically pleasing soft-ON/fade-OFF that extends lamp life
- Programmable rapid start feature ensures lamp start-up even at low dim levels
- Faceplate is removable to allow for color change
- Compatible with most common dimmable lighting loads (phase-cut)
Length (in.) | 3.81" |
Width (in.) | 1.38" |
Depth (in.) | 2.24" |
Weight (lbs) Each | .244 lbs |
Spec Sheet
Spec Sheet
Info
Type | Decorator Switch |
Connector Type |
Screw
|
Switch Type |
Single-pole
|
Compliance |
RoHS Compliant
|
Certifications | cULus Listed |
Color | White |
Material | Polycarbonate |
Additional Info
Load Type | MLV, CFL, ELV, INC, HAL, FLR, Fan, LED |
Wiring Method | Wire lead |
Mounting | Flush |
Closure Type |
Maintained |
Voltage | 120V |
Amp. Rating | 15 A |
Use | Residential |
Actuator |
Push Pad |